Low Water Pressure in Greenville, TX

Common causes: clogged aerators, partially closed shutoff valves, a failing pressure regulator, corroded galvanized pipes restricting flow, leaks in the supply line, or municipal water main issues. In Greenville homes with galvanized pipes, internal corrosion is a frequent culprit.

Start simple: clean faucet aerators, check shutoff valves are fully open. If the problem is house-wide, test your water pressure with a gauge (should be 40-60 PSI). Below 40 PSI, call a plumber to check the pressure regulator and main supply line.

Causes and costs: aerator cleaning (free DIY), pressure regulator replacement $200-$400, main water line repair $1,500-$5,000, whole-house repipe $4,000-$15,000. A plumber's diagnostic visit ($100-$200) identifies the cause before you commit to expensive repairs.

Yes — galvanized steel pipes (common in homes built before 1960) corrode internally, narrowing the pipe and restricting water flow. If your Greenville home has original galvanized pipes and low pressure throughout, repiping to PEX or copper is the permanent fix.